SEC C / ROOFING & ENVELOPE
Frameless glass systems in Bali
Frameless glass earns its price by disappearing: a terrace that keeps the rice-field view intact, a pool fence that answers the safety brief without turning a garden into a cage. What holds it up is a short list of unglamorous components — the glass grade, the metal of the spigot, and the concrete the anchors bite into. Get any one of them wrong on this island and the failure is not cosmetic.
- Heat-soak tested toughened glass as standard
- 316 stainless hardware on coastal sites
- Anchors set into checked concrete and pull-tested
We install balustrades on spigots, base shoe or channel, glass pool fencing with self-closing gates, shower enclosures and full-height partitions. Every panel is toughened, and wherever a person could fall it is laminated as well, so a break leaves a cracked panel standing rather than an open edge on a first floor. Panels are heat-soak tested before they ship, which is the only real defence against the spontaneous breakage nickel sulphide inclusions cause.
Hardware grade is a coastal decision, not a catalogue preference. Grade 304 stainless looks identical to 316 in a showroom and starts weeping rust streaks within one wet season in Seminyak or Bingin; within sight of the water we fit 316 as standard and coated or duplex fittings on the most exposed sites. Fixings are chemical anchors set with real edge distance into slabs we have checked — never bolted through a tile bed and hoped for.
Why frameless glass fails in the tropics
Almost never because the glass was too thin. The failures we get called to are hardware and anchor failures: a 304 spigot bleeding rust down a white terrace after one rainy season, or a bolt set 40 mm from a slab edge that has quietly cracked the concrete around it and now moves when somebody leans on the panel.
The second failure mode is thermal. A dark spigot in full sun reaches 70 °C, the glass pushes into it, and any panel bedded hard against metal instead of on rubber packers concentrates that stress at a point. Add a nickel sulphide inclusion left in untested toughened glass and a panel can shatter on a still afternoon with nobody near it. Heat soaking, correct packers and honest anchor detailing take nearly all of that risk away for a small fraction of what the panel itself costs.
Pool fences, edges and the safety brief
Glass fencing exists to stop a small child reaching water unsupervised, and most systems sold here fail that job on details rather than on glass. Gaps under panels or beside gate posts wider than 100 mm, gates that swing both ways, latches mounted low enough for a determined four-year-old, a planter box parked alongside as a step — every one of those is a way through.
We set panels at 1.2 m, keep the gaps tight, hang gates so they close and latch from any open position with the latch out of reach, and keep both sides of the line clear of anything climbable. The same reasoning covers terrace edges, mezzanines and stair voids: if a fall is possible from it, the panel is laminated, so a broken pane stays where it is until we replace it.
SCOPE OF WORK
What's included
Substrate check
Slab thickness, edge distance and concrete quality verified before anybody quotes a fixing method.
Balustrade systems
Spigot, base-shoe and channel systems set to line and level, laminated wherever a fall is possible.
Glass pool fencing
1.2 m panels, hinged self-closing gates and gap control that answers a serious child-safety brief.
Showers & partitions
10–12 mm toughened enclosures with minimal hardware and silicone lines cut clean, not smeared.
Hardware & finishes
316 stainless, duplex or powder-coated fittings selected by how far the job sits from the ocean.
Fixing & load testing
Chemical anchors torque-checked, then every panel pushed to load before we sign the job off.
PROCESS
How the job runs
- 01
Measure & substrate check
Site measure, slab and edge-distance check, and a straight answer on whether the structure takes the fixing.
- 02
Specification & quote
Glass build-up, hardware grade and gate layout priced per metre, itemised and fixed.
- 03
Fabrication & delivery
Panels cut, polished, toughened and heat-soak tested, then delivered in protected frames.
- 04
Install, load-check, hand over
Anchors set and torqued, panels aligned to a string line, each one pushed to load and signed off.
INDICATIVE PRICING
Honest numbers, before the survey
| Scope | Guide price |
|---|---|
| Frameless balustrade (12 mm, spigots) | from IDR 3,900,000 / m |
| Glass pool fence with self-closing gate | from IDR 4,200,000 / m |
| Frameless partitions & screens | from IDR 3,100,000 / m² |
| Frameless shower enclosure | from IDR 8,900,000 / unit |
| Upgrade to 316 stainless spigots | from IDR 1,250,000 each |
Guide figures for standard heights and clear access; the measured quote is fixed after a free site visit and substrate check.
Request an exact quoteFAQ
Frameless glass in Bali — what owners ask
Is frameless glass safe with young children around a pool?
It is when the details are right, and close to useless when they are not. Height, gap control under and beside every panel, a gate that self-closes and latches out of reach, and nothing climbable within a metre of the line. We build to that brief, and we will say plainly when ground levels or a gate position make a fence easy to defeat.
What is heat-soak testing, and why does it matter here?
Toughened glass occasionally carries microscopic nickel sulphide inclusions that expand over years and burst the pane without warning; sun and daily heat cycling bring that forward. Heat soaking holds the glass near 290 °C for hours so suspect panels break in the oven instead of over your terrace. It adds little to the price and removes most of the risk.
Can glass fix to an existing terrace, or does the slab need work?
Often it can, but the slab decides. Spigots need sound concrete, enough depth for the anchor embedment and real edge distance — typically 100 mm or more back from the lip. Where a terrace is thin, tiled over screed or built off blockwork, we face-mount the panels or add a fixing beam rather than bolt into something that will crack.
What does frameless glass cost in Bali?
Balustrades start at IDR 3,900,000 per metre, glass pool fencing at IDR 4,200,000 per metre and frameless partitions at IDR 3,100,000/m². Coastal hardware, laminated build-ups and the number of gates shift those figures. Everything is measured free and then quoted per metre with the glass spec and hardware grade written down, so you can compare like with like.
RELATED SERVICES